Manufacturer of Custom Triple Trees for any brand motorcycle! Domestic or imported!!
Put the custom front End you want on the motorcycle you have !

pricing and options

General Pricing And Options
All of our Custom Triple Trees sets are built to order with prices ranging from $475.00 to $1200.00 USD. Actual cost will vary depending on selection of material size, machining detail, finish, features and accessories. Details can be added or removed upon request. Our Standard finish is a scuffed 180. Other finishes are polished, black and colored anodizing, black and colored powder coating. Please contact us if you have any questions

Stock Application - Raked Custom Triple Trees
Price range from $800.00 to $1200.00. Stock application sets re-bolt and reuse all the stock hardware ,covers, gages, nacelles and ignitions. We machine the tree sets close to stock with the required rake angle.

Open Custom Triple Trees
Price range from $475.00 to $750.00. Built to order offering a wide variety of options and detail. The stock fork tubes are reused and the stock width is maintained. Some options are a custom headlight and mount location ,custom risers and location ,choice of material thickness and finish. Other custom details can be added upon request. These tree sets can be built either with or without a rake. The tree sets fit your stock frame. The fork stops ,neck bearings and neck length are maintained for you model.

Custom Conversion Triple Trees
Price range from from $600.00 to $1000.00. Designed to convert fork tubes from a particular make/model motorcycle to be mounted on another make/model. Custom conversion sets can be built with a wide variety of options. A very popular option is inverted fork tubes, Ceriani or Hyabusa . Widening the tree set is another option. Running a larger wheel is also popular.

Drop Pocket Custom Triple Trees
Price Range from $700.00 to $1100.00. Drop pocket triple tree sets can be built on certain models with a minimum width requirement. The advantage to a drop pocket is basic. It allows the use of fork tubes and lower legs that are to short and cannot be extended. Some inverted tube sets fall into this category. The drop pocket and custom conversion sets work well in combination. We can build a drop pocket triple tree set with up to 1 1/2" of drop requiring 2 1/2" thick material. This allows fork tubes that would be otherwise be to short to work on the bike. Click HERE for an example application of Hyabusa forks mounted to a Harley-Davidson Dyna using drop pocket Custom Triple Trees.

 


Custom Triple Trees by Machine And Design
Contact Us
Copyright © 2022 · All Rights Reserved · customtripletrees.com